Hobbywing 10A 5A 3A 8A 25A UBEC output 6V 7.4v 8.4v supports 3-14s lithium battery high voltage rc Voltage Regulator Module

Hobbywing 10A 5A 3A 8A 25A UBEC output 6V 7.4v 8.4v supports 3-14s lithium battery high voltage rc Voltage Regulator Module

summary

UBEC is an external DC voltage regulator that operates in the form of a switching power supply. This UBEC can obtain a DC voltage suitable for the operation of receivers and other devices from a 2-6S lithium battery pack, and provide a stable output current of 3A. In cases where the built-in BEC output capability of the electronic speed controller is insufficient or there is no built-in BEC, this UBEC can be used in conjunction with any manufacturer’s Shenzi speed controller to provide sufficient power supply for receivers and other electronic devices

Specifications：3A UBEC

• No.: 86010010;
• Output capacity: 5V@3A Or 6V@3A (it can be switched through jumper cap);
• Power input: 5.5-26v  (2-6 lithium batteries or 5-18 nickel hydrogen / nickel cadmium batteries)
• Size: 51×16.6×8.5mm (length x width x height)
• Weight: 11.5g

• Ripple: less than 50mvp-p (@2a/12v input)

Product Overview

UBEC is an external DC voltage regulator that operates in the form of a switching power supply. This UBEC can obtain a DC voltage suitable for the operation of receivers and other devices from a 2-3S lithium battery pack, and provide a stable output current of up to 8A. This UBEC can easily power receivers, gyroscopes, and multiple servos, making it very suitable for use in oil powered model helicopters and large fixed wing aircraft above level 30.

Specifications：8A UBEC

• No.: 86010030

• Output capacity: continuous 5v/8A or 6v/8A (the output voltage can be controlled through the control switch Switching), maximum output current 15A;

• Static current: 60mA

• Power input: 6-12.6v (2-3s lithium battery pack)

• Size: 42 × 39x9mm (length x width x height)

• Weight: 36g

Hobbywing small car 10A-UBEC2~6S fully waterproof and voltage reducing module 6/7.4/8.4V

Specifications：UBEC 10A LowV

• Model ：UBEC-10A LowV

• Input VoItage：2-6 lithi
• Output VoItage：6.0V/7.4V/8.4V （3-gear Adjustable）
• Output Current：Continuous Current:10A, Peak Current:15A
• Size：45*20*16.2mm
• Weight：34g (Including weight of wire)

summary

The UBEC adopts a high-efficiency DC-DC voltage regulator chip, with a conversion efficiency of over 90%. The all metal shell design helps with heat dissipation and reduces electromagnetic interference. The output voltage of UBEC can be adjusted in three levels (6.0/7.4/8.4V), with a continuous current of 10A and a maximum of 15A, which can meet the use of various voltage specifications of servos and electrical equipment (such as headlights, winches, wipers, etc.). Simultaneously equipped with overcurrent protection, output short circuit protection, overheating protection, and IP67 waterproof and dustproof design, it can be widely used in vehicle models with a large number of electrical equipment such as climbing vehicles, engineering vehicles, and trailers.

UBEC-10A (3-14S) external new product BEC manufactured by Haoying. UBEC is an external DC voltage regulator that operates in a switch mode power supply. This UBEC can obtain DC voltage suitable for receiver and other equipment operation from the 3-14S lithium battery pack, and provide stable output current of up to 10A. This UBEC can easily power various devices on the remote control model, especially suitable for large helicopters and fixed wing aircraft that use multiple servos.

Specifications：10A HV UBEC

• Input voltage: 3-14s (lithium battery cells)

• Output voltage: 6.0v/7.4v/8.4v (adjusted by jumper cap)

• Output current: continuous 10a, instantaneous 25A

• Size: 55*25*12mm

• Weight: 35g

Specifications：25A UBEC

• Model ：25A UBEC
• Main Input Voltage：3-18S LiPo
• Backup Input Voltage：1-2S LiPo
• Output Voltage：5.2V / 6.0V / 7.4V / 8.4V
• Output Amperage：Continuous Current 25A. Peak Current 50A
• Weight：74g
• Size : 55*40.2*17.6mm

UBEC-10A (3-14S) external new product BEC manufactured by Haoying. UBEC is an external DC voltage regulator that operates in a switch mode power supply. This UBEC can obtain DC voltage suitable for receiver and other equipment operation from the 3-14S lithium battery pack, and provide stable output current of up to 10A. This UBEC can easily power various devices on the remote control model, especially suitable for large helicopters and fixed wing aircraft that use multiple servos.