3 hours VTOL V tail drone frame for mapping surveillance

3 hours VTOL V tail drone frame for mapping surveillance is the characteristics of long-endurance, high-speed and long-distance of fixed-wing UAVs and the vertical take-off and landing of rotor-wing drones. It does not require runway but only small space for take-off and landing, and can be operated smoothly on ship deck, narrow airspace, mountain, complex terrain and densely populated areas such as hills, jungles.

Specification

Body material: carbon fiber, glass fiber, Kevlar, pvc interlayer, etc.
Body length: 1.26m
Wingspan: 2.5m
Landing gear height: 19.5cm
Structure weight: about 3.2kg
Maximum take-off weight: less than 13kg
Maximum payload: 2kg (standard load: 1-1.5kg)
Endurance time: 170min/1.5kg (standard power configuration) (fixed wing power can be equipped with 18650 batteries to increase endurance time)
Standard cruising speed: 65km/h (about 18m/s)
Maximum cruising speed: 108km/h (30m/s)
Stall speed: 16m/s
Minimum circling radius: 150m
Maximum level flight limit: 4000m above sea level
Wind resistance of fixed-wing mode: no less than 7 wind (17.1m/s)
Maximum wind resistance in rotor take-off and landing mode: no less than class 4 wind (7.9m/s)
Operating environment: -20℃~45℃; can fly in light rain
Power battery: 2*5300mah (vertical take-off and landing) 2*25000mah (fixed wing cruise)

Recommended Set-up:

4 x T-motor MN505S KV260
4 x T-motor 6S 60A ESC
2 x P16*5.4 Propeller CW&CCW
1 x T-motor AT115A  ESC
1 x T-motor AT4130 KV230
1 x APC 17″ Propeller CW
4 x GDW296X servo
1 x PX4 Air Speedometer
1 x Power Module For Pixhawk 2.1
1 x Pixhawk 2.1 Standard Set with Here 2 GNSS
1 x Herelink
2 x 6S 25000mAh Lipo battery

NOTE： THE PRICE IS JUST KIT, WITHOUT ANY ELECTRONIC, AND THE PACKING IS IN WOODEN CASE NOT IN ALUMINUM BOX!